Värmeåtervinning på förskolan Rymdattacken 1 : En jämförelse av värmeväxlare

In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and...

Full description

Bibliographic Details
Main Author: Vidar, Caroline
Format: Others
Language:Swedish
Published: Umeå universitet, Institutionen för tillämpad fysik och elektronik 2014
Subjects:
Online Access:http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-96410
id ndltd-UPSALLA1-oai-DiVA.org-umu-96410
record_format oai_dc
spelling ndltd-UPSALLA1-oai-DiVA.org-umu-964102014-11-22T04:56:43ZVärmeåtervinning på förskolan Rymdattacken 1 : En jämförelse av värmeväxlaresweVidar, CarolineUmeå universitet, Institutionen för tillämpad fysik och elektronik2014värmeväxlarevärmeåtervinningtemperaturverkningsgradIn the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers. The values from the simulations are then used to make calculations of the heat exchangers use of energy in Joulin. Even a comparison of temperature efficiencies have been made to see how well the heat recycler is working. To get an economic aspect, the calculation of LCC have been made. This work was in addition to the comparison even to find out about the values that came from the simulations to the original unit consists. It turned out that the temperature efficiency shown in these simulations was calculated at a different temperature than the other heat exchangers so it showed a higher percentage than if it had been shown for the same temperature as the other units showed in their simulation. Thus, a calculation of the temperature efficiency for the same temperature in order to make a fair comparison. After studying the different values it was concluded that a rotating heat exchanger should have been chosen instead of the original cross-flow heat exchanger. Student thesisinfo:eu-repo/semantics/bachelorThesistexthttp://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-96410application/pdfinfo:eu-repo/semantics/openAccess
collection NDLTD
language Swedish
format Others
sources NDLTD
topic värmeväxlare
värmeåtervinning
temperaturverkningsgrad
spellingShingle värmeväxlare
värmeåtervinning
temperaturverkningsgrad
Vidar, Caroline
Värmeåtervinning på förskolan Rymdattacken 1 : En jämförelse av värmeväxlare
description In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers. The values from the simulations are then used to make calculations of the heat exchangers use of energy in Joulin. Even a comparison of temperature efficiencies have been made to see how well the heat recycler is working. To get an economic aspect, the calculation of LCC have been made. This work was in addition to the comparison even to find out about the values that came from the simulations to the original unit consists. It turned out that the temperature efficiency shown in these simulations was calculated at a different temperature than the other heat exchangers so it showed a higher percentage than if it had been shown for the same temperature as the other units showed in their simulation. Thus, a calculation of the temperature efficiency for the same temperature in order to make a fair comparison. After studying the different values it was concluded that a rotating heat exchanger should have been chosen instead of the original cross-flow heat exchanger.
author Vidar, Caroline
author_facet Vidar, Caroline
author_sort Vidar, Caroline
title Värmeåtervinning på förskolan Rymdattacken 1 : En jämförelse av värmeväxlare
title_short Värmeåtervinning på förskolan Rymdattacken 1 : En jämförelse av värmeväxlare
title_full Värmeåtervinning på förskolan Rymdattacken 1 : En jämförelse av värmeväxlare
title_fullStr Värmeåtervinning på förskolan Rymdattacken 1 : En jämförelse av värmeväxlare
title_full_unstemmed Värmeåtervinning på förskolan Rymdattacken 1 : En jämförelse av värmeväxlare
title_sort värmeåtervinning på förskolan rymdattacken 1 : en jämförelse av värmeväxlare
publisher Umeå universitet, Institutionen för tillämpad fysik och elektronik
publishDate 2014
url http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-96410
work_keys_str_mv AT vidarcaroline varmeatervinningpaforskolanrymdattacken1enjamforelseavvarmevaxlare
_version_ 1716720269868924928