Laser processing of Tb0.3Dy0.7Fe1.92 films

In the past decade, there has been an increased interest in magnetostrictive materials for micro actuators and sensors. Of particular importance are the Fe₂R intermetallics, where R = Tb, Dy. In this study, films of Tb[subscript 0.3]Dy[subscript 0.7]Fe[subscript 1.92] were prepared by three laser pr...

Full description

Bibliographic Details
Main Author: Ma, Dat Truong
Other Authors: Kovar, Desiderio
Format: Others
Language:English
Published: 2008
Subjects:
Online Access:http://hdl.handle.net/2152/3750
id ndltd-UTEXAS-oai-repositories.lib.utexas.edu-2152-3750
record_format oai_dc
spelling ndltd-UTEXAS-oai-repositories.lib.utexas.edu-2152-37502015-09-20T16:52:44ZLaser processing of Tb0.3Dy0.7Fe1.92 filmsMa, Dat TruongLaser ablationPulsed laser depositionThick filmsThin filmsNanoparticlesIron compoundsDysprosiumTerbiumIntermetallic compoundsIn the past decade, there has been an increased interest in magnetostrictive materials for micro actuators and sensors. Of particular importance are the Fe₂R intermetallics, where R = Tb, Dy. In this study, films of Tb[subscript 0.3]Dy[subscript 0.7]Fe[subscript 1.92] were prepared by three laser processing techniques (pulsed laser deposition, flat plate ablation and laser ablation of microparticles) to explore the effect of processing parameters on particle size, crystallinity and magnetic properties. The laser used in the experiments was a KrF laser with a 12 ns pulse width. Pulsed laser deposition of an alloyed target in vacuum produces dense amorphous films with the similar composition to the target, low coercivity (46 Oe) and good magnetostriction ([lambda][subcript two horizontal lines] = 305 ppm at 2300 Oe). Flat plate ablation and laser ablation of microparticles produced amorphous nanoparticles at 1 atm. The particles were subsequently jet deposited onto substrates to form thick films. Nanoparticle films produced by flat plate ablation resulted in oxidized and segregated particles due to extended, non-uniform plume expansion, laser target modification, and open porosity. Laser ablation of microparticles produced thick films with M[subscript s] = 13.8 emu/g. Two types of annealing treatments were performed to close porosity and increase Youngs modulus. Annealing of LAM films at temperatures up to 700°C in-situ and 950°C in a reducing atmosphere did not result in coarsening of the particles or crystallization of the Laves phase due to the core-shell structure of nanoparticles (rare earth oxide shell, Fe rich core) brought about by oxidation-induced segregation.Kovar, Desiderio2008-08-29T00:07:52Z2008-08-29T00:07:52Z2007-122008-08-29T00:07:52ZThesiselectronichttp://hdl.handle.net/2152/3750212627386engCopyright © is held by the author. Presentation of this material on the Libraries' web site by University Libraries, The University of Texas at Austin was made possible under a limited license grant from the author who has retained all copyrights in the works.
collection NDLTD
language English
format Others
sources NDLTD
topic Laser ablation
Pulsed laser deposition
Thick films
Thin films
Nanoparticles
Iron compounds
Dysprosium
Terbium
Intermetallic compounds
spellingShingle Laser ablation
Pulsed laser deposition
Thick films
Thin films
Nanoparticles
Iron compounds
Dysprosium
Terbium
Intermetallic compounds
Ma, Dat Truong
Laser processing of Tb0.3Dy0.7Fe1.92 films
description In the past decade, there has been an increased interest in magnetostrictive materials for micro actuators and sensors. Of particular importance are the Fe₂R intermetallics, where R = Tb, Dy. In this study, films of Tb[subscript 0.3]Dy[subscript 0.7]Fe[subscript 1.92] were prepared by three laser processing techniques (pulsed laser deposition, flat plate ablation and laser ablation of microparticles) to explore the effect of processing parameters on particle size, crystallinity and magnetic properties. The laser used in the experiments was a KrF laser with a 12 ns pulse width. Pulsed laser deposition of an alloyed target in vacuum produces dense amorphous films with the similar composition to the target, low coercivity (46 Oe) and good magnetostriction ([lambda][subcript two horizontal lines] = 305 ppm at 2300 Oe). Flat plate ablation and laser ablation of microparticles produced amorphous nanoparticles at 1 atm. The particles were subsequently jet deposited onto substrates to form thick films. Nanoparticle films produced by flat plate ablation resulted in oxidized and segregated particles due to extended, non-uniform plume expansion, laser target modification, and open porosity. Laser ablation of microparticles produced thick films with M[subscript s] = 13.8 emu/g. Two types of annealing treatments were performed to close porosity and increase Youngs modulus. Annealing of LAM films at temperatures up to 700°C in-situ and 950°C in a reducing atmosphere did not result in coarsening of the particles or crystallization of the Laves phase due to the core-shell structure of nanoparticles (rare earth oxide shell, Fe rich core) brought about by oxidation-induced segregation.
author2 Kovar, Desiderio
author_facet Kovar, Desiderio
Ma, Dat Truong
author Ma, Dat Truong
author_sort Ma, Dat Truong
title Laser processing of Tb0.3Dy0.7Fe1.92 films
title_short Laser processing of Tb0.3Dy0.7Fe1.92 films
title_full Laser processing of Tb0.3Dy0.7Fe1.92 films
title_fullStr Laser processing of Tb0.3Dy0.7Fe1.92 films
title_full_unstemmed Laser processing of Tb0.3Dy0.7Fe1.92 films
title_sort laser processing of tb0.3dy0.7fe1.92 films
publishDate 2008
url http://hdl.handle.net/2152/3750
work_keys_str_mv AT madattruong laserprocessingoftb03dy07fe192films
_version_ 1716820608718733312