Design and Implementation of Calculated Readout by Spectral Parallelism (CRISP) in Magnetic Resonance Imaging (MRI)

CRISP is a data acquisition and image reconstruction technique that offers theoretical increases in signal-to-noise ratio (SNR) and dynamic range over traditional methods in magnetic resonance imaging (MRI). The incoming broadband MRI signal is de-multiplexed into multiple narrow frequency bands us...

Full description

Bibliographic Details
Main Author: So, Simon Sai-Man
Language:en
Published: 2010
Subjects:
MRI
RF
Online Access:http://hdl.handle.net/10012/5215
id ndltd-WATERLOO-oai-uwspace.uwaterloo.ca-10012-5215
record_format oai_dc
spelling ndltd-WATERLOO-oai-uwspace.uwaterloo.ca-10012-52152013-01-08T18:53:21ZSo, Simon Sai-Man2010-05-20T19:25:31Z2010-05-20T19:25:31Z2010-05-20T19:25:31Z2010http://hdl.handle.net/10012/5215CRISP is a data acquisition and image reconstruction technique that offers theoretical increases in signal-to-noise ratio (SNR) and dynamic range over traditional methods in magnetic resonance imaging (MRI). The incoming broadband MRI signal is de-multiplexed into multiple narrow frequency bands using analog filters. Signal from each narrowband channel is then individually captured and digitized. The original signal is recovered by recombining all the channels via weighted addition, where the weights correspond to the frequency responses of each narrowband filter. With ideal bandpasses and bandwidth dependent noise after filtering, SNR increase is proportional to sqrt(N), where N is the number of bandpasses. In addition to SNR improvement, free induction decay (FID) echoes in CRISP experience a slower decay rate. In situations where resolution is limited by digitization noise, CRISP is able to capture data further out into the higher frequency regions of k-space, which leads to a relative increase in resolution. The conversion from one broadband MR signal into multiple narrowband channels is realized using a comb or bank of active analog bandpass filters. A custom CRISP RF receiver chain is implemented to downconvert and demodulate the raw MR signal prior to narrowband filtering, and to digitize the signals from each filter channel simultaneously. Results are presented demonstrating that the CRISP receiver chain can acquire 2D MR images (without narrowband filters) with SNR similar to SNR of images obtained with a clinical system. Acquiring 2D CRISP images (with narrowband filters) was not possible due to the lack of phase lock between rows in k-space. RMS noise of narrowband, broadband and unfiltered 1D echoes are compared.enMRIRFfiltersreciever chainCRISPnoise reductionDesign and Implementation of Calculated Readout by Spectral Parallelism (CRISP) in Magnetic Resonance Imaging (MRI)Thesis or DissertationSystems Design EngineeringMaster of Applied ScienceSystem Design Engineering
collection NDLTD
language en
sources NDLTD
topic MRI
RF
filters
reciever chain
CRISP
noise reduction
System Design Engineering
spellingShingle MRI
RF
filters
reciever chain
CRISP
noise reduction
System Design Engineering
So, Simon Sai-Man
Design and Implementation of Calculated Readout by Spectral Parallelism (CRISP) in Magnetic Resonance Imaging (MRI)
description CRISP is a data acquisition and image reconstruction technique that offers theoretical increases in signal-to-noise ratio (SNR) and dynamic range over traditional methods in magnetic resonance imaging (MRI). The incoming broadband MRI signal is de-multiplexed into multiple narrow frequency bands using analog filters. Signal from each narrowband channel is then individually captured and digitized. The original signal is recovered by recombining all the channels via weighted addition, where the weights correspond to the frequency responses of each narrowband filter. With ideal bandpasses and bandwidth dependent noise after filtering, SNR increase is proportional to sqrt(N), where N is the number of bandpasses. In addition to SNR improvement, free induction decay (FID) echoes in CRISP experience a slower decay rate. In situations where resolution is limited by digitization noise, CRISP is able to capture data further out into the higher frequency regions of k-space, which leads to a relative increase in resolution. The conversion from one broadband MR signal into multiple narrowband channels is realized using a comb or bank of active analog bandpass filters. A custom CRISP RF receiver chain is implemented to downconvert and demodulate the raw MR signal prior to narrowband filtering, and to digitize the signals from each filter channel simultaneously. Results are presented demonstrating that the CRISP receiver chain can acquire 2D MR images (without narrowband filters) with SNR similar to SNR of images obtained with a clinical system. Acquiring 2D CRISP images (with narrowband filters) was not possible due to the lack of phase lock between rows in k-space. RMS noise of narrowband, broadband and unfiltered 1D echoes are compared.
author So, Simon Sai-Man
author_facet So, Simon Sai-Man
author_sort So, Simon Sai-Man
title Design and Implementation of Calculated Readout by Spectral Parallelism (CRISP) in Magnetic Resonance Imaging (MRI)
title_short Design and Implementation of Calculated Readout by Spectral Parallelism (CRISP) in Magnetic Resonance Imaging (MRI)
title_full Design and Implementation of Calculated Readout by Spectral Parallelism (CRISP) in Magnetic Resonance Imaging (MRI)
title_fullStr Design and Implementation of Calculated Readout by Spectral Parallelism (CRISP) in Magnetic Resonance Imaging (MRI)
title_full_unstemmed Design and Implementation of Calculated Readout by Spectral Parallelism (CRISP) in Magnetic Resonance Imaging (MRI)
title_sort design and implementation of calculated readout by spectral parallelism (crisp) in magnetic resonance imaging (mri)
publishDate 2010
url http://hdl.handle.net/10012/5215
work_keys_str_mv AT sosimonsaiman designandimplementationofcalculatedreadoutbyspectralparallelismcrispinmagneticresonanceimagingmri
_version_ 1716573558617931776