Charge-coupled device optimizations for astronomy.

• Main Author: Lesser, Michael Patrick
• Other Authors: Angel, J. Roger P.
• Language: en
• Published: The University of Arizona. 1988
• Subjects: Charge coupled devices.; Imaging systems in astronomy.
• Online Access: http://hdl.handle.net/10150/184387

In the past decade, charge-coupled devices (CCDs) have rapidly become the astronomical imaging detector of choice for the visible and near-IR spectral regions. There are, however, several problems which have greatly reduced the availability of sufficient quality CCDs to the astronomical community. These include the low blue and ultraviolet quantum efficiency of thick devices, the lack of properly thinned devices, warped imaging surfaces, interference fringing, and the small size of the detectors themselves compared to telescope focal planes. This dissertation presents methods which can be used to optimize CCDs obtained from various manufacturers for astronomical observations. A new thinning technique which produces an optically flat surface across an entire CCD is demonstrated. A mounting technique which maintains a flat and stable imaging surface for thinned devices by bonding the CCD backside against a transparent glass support substrate is also demonstrated. Bump bonding of CCDs onto a silicon support before thinning is discussed as a future mounting/thinning technique. The design of antireflection coatings for the near-UV through near-IR spectral regions is explained and demonstrated on silicon diodes, allowing quantum efficiencies as high as 90% to be obtained. The reduction of interference fringing amplitudes by as much as 70% in the red and near-IR with AR coatings is also discussed. And finally, the design of CCD focal plane mosaics using the optimization techniques presented is discussed.