Stress relief cracking in A533B and A508C1 2 pressure vessel steels

Stress relief cracking in A533B and A508C1 2 pressure vessel steels

Bibliographic Details
Main Author:	Barlow, D.
Published:	University of Leeds 1988
Subjects:	669 Weld heat treatment][Reheat cracking
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.233221

Similar Items

Susceptibility of creep aged material to stress relief cracking during repair welding
by: Moggee, Herman
Published: (2014)

Phase Transformation Behavior and Stress Relief Cracking Susceptibility in Creep Resistant Steels
by: Strader, Katherine C.
Published: (2014)

Improvement of stress-relief cracking resistance in coarse-grained heat-affected zone of T23 steel by refining sub-structure through second thermal cycle
by: Yong Li, et al.
Published: (2020-07-01)

Stress relief cracking in creep resisting low alloy ferritic steels
by: Tait, Robert Andrew
Published: (1976)

Study on the Fatigue Crack Growth Properties of A533 and A508 Steels
by: Wen-Cheng Ho, et al.
Published: (2008)

Electrochemical behaviour of segregants in relation to stress corrosion cracking of 3.5NiCrMoV steel
by: Kearns, M. A.
Published: (1986)

Causes of the cracks in the pipeline made of the 15HM steel
by: Słania J., et al.
Published: (2017-03-01)

The effect of environment on fatigue crack growth in 316 stainless steel
by: Neailey, Kevin
Published: (1987)

Determination of the critical values of toughness on crack of steels and welded joints
by: Krzysztof Werner, et al.
Published: (2018-08-01)

Design of steel weld deposits
by: Cool, Tracey
Published: (1996)

The application of the J-integral to stress corrosion cracking
by: Mackay, F. G.
Published: (1987)

Suitability of heat treatment for crack resistance of material in the connection part of heavy transporter for liquid slag
by: T. Vuherer, et al.
Published: (2014-04-01)

Correlation of mechanical test parameters with fatigue crack growth rates in structural steels
by: Divsalar, F.
Published: (1988)

The microstructures and properties of heat affected zones in high strength structural steels
by: Youn, Joong Geun
Published: (1992)

Cracking of drying ceramic dispersions
by: Hopkinson, Andrew Christopher Graham
Published: (2013)

Effects of warm prestressing on A533B weld metal
by: Reed, Philippa Ann Sarah
Published: (1990)

Development of a gleeble based test for post weld heat treatment cracking in nickel alloys
by: Norton, Seth J.
Published: (2003)

Investigation of the Residual Stress in a Multi-Pass T-Welded Joint Using Low Transformation Temperature Welding Wire
by: Zhongyuan Feng, et al.
Published: (2021-01-01)

Steam-reheat option for supercritical-water-cooled reactors
by: Saltanov, Eugene
Published: (2011)

Microstructure and toughness of electron beam welds in steel
by: OÌ„hara, Masahiro
Published: (1993)

Heat Affected Zone Cracking of Allvac 718Plus Superalloy during High Power Beam Welding and Post-weld Heat Treatment
by: Idowu, Oluwaseun Ayodeji
Published: (2010)

Heat Affected Zone Cracking of Allvac 718Plus Superalloy during High Power Beam Welding and Post-weld Heat Treatment
by: Idowu, Oluwaseun Ayodeji
Published: (2010)

The characterisation of fatigue cracks by means of eddy currents
by: Williams, D. J. A.
Published: (1984)

Some aspects of plastic flow, residual stress and fatigue cracks due to rolling and sliding contact
by: Bower, A. F.
Published: (1987)

A Study on Microstructure, Residual Stresses and Stress Corrosion Cracking of Repair Welding on 304 Stainless Steel: Part I-Effects of Heat Input
by: Yun Luo, et al.
Published: (2020-05-01)

The stress corrosion cracking of maraging steels
by: Haigh, P. M.
Published: (1970)

Isothermal Stress-Relief and Stress-Relaxation of Cold-Extruded Mild Steel Rods
by: Adeyemi, M. B.
Published: (1979)

The role of residual stress to hardening and cracking on quenched and tempered ARMOR steel welded joints
by: P. Yanuar, et al.
Published: (2021-01-01)

A comparative study of fracture in stainless steel weld metal and wrought stainless steel
by: Goodwin, S. J.
Published: (1987)

Cold weld cracking susceptibility of high strength low alloyed (HSLA) steel NIONIKRAL 70
by: A. S. Tawengi, et al.
Published: (2014-10-01)

Two Dimensional Thermal-Hydraulic Analysis for a Packed Bed Regenerator Used in a Reheating Furnace
by: Chien-Nan Lin, et al.
Published: (2016-11-01)

A ductile fracture study of A508 class 3 steel
by: Beck, R.
Published: (1986)

Numerical investigation on stress corrosion cracking behavior of dissimilar weld joints in pressurized water reactor plants
by: Lingyan Zhao, et al.
Published: (2014-07-01)

Increase in energy efficiency of a steel billet reheating furnace by heat balance study and process improvement
by: Koushik Chakravarty, et al.
Published: (2020-11-01)

Microstructural Evolution of 9CrMoW Weld Metal in a Multiple-Pass Weld
by: Yu-Lun Chuang, et al.
Published: (2021-05-01)

Fusion characteristics in P-GMAW of mild steel
by: Quintino, L.
Published: (1986)

Weld metal microstructures of molybdenum bearing structural steels
by: Dunne, Derek Joseph
Published: (1990)

Stress Corrosion Cracking Threshold for Dissimilar Capacitive Discharge Welding Joint with Varied Surface Geometry
by: Darmadi B. Djarot, et al.
Published: (2020-03-01)

On the mechanism of the stress-corrosion cracking of austenitic stainless steels
by: Hines, J. G.
Published: (1956)

The Stress Corrosion Cracking of Mild Steel in Carbonate Solution
by: Marsh, G. P.
Published: (1976)

Cannot write session to /tmp/vufind_sessions/sess_addqif5kdt4m70lrnocth4c1gm