The analysis of piping systems on a microcomputer using pipe bend elements

The analysis of piping systems on a microcomputer using pipe bend elements

Bibliographic Details
Main Author:	See, P. S.
Published:	University of Strathclyde 1985
Subjects:	621.69 Pumps & filters & pipes & tubing & valves
Online Access:	http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.371380

Similar Items

A study on pipe bends : an analysis of the smooth pipe bend with flanged end constraints under out-of-plane bending and the development of experimental techniques in the creep of pipe bends
by: Rae, Kenneth
Published: (1984)

The influence of end constraints on pipe bends : a study of smooth pipe bends with flange and tangent pipe end constraints under in-plane bending
by: Thomson, Gordon
Published: (1980)

Strength and flexibility of glass reinforced plastic pipes and pipe bends
by: Tan, A. L.
Published: (1983)

Creep of pipe bends with end constraints
by: Chan, C. K. L.
Published: (1984)

A study of single mitre pipe bends
by: Wood, J.
Published: (1983)

A study on simple piping elbow finite elements
by: Mackenzie, Donald
Published: (1990)

Plastic loads for branch pipe junctions subjected to combined internal pressure and in-plane bending moments
by: Kirkwood, Michael George
Published: (1989)

The use of network analysis for the simulation of flows in pipe network systems
by: Ti, H. C.
Published: (1981)

Analysis and design of buried flexible pipes
by: Gumbel, J. E.
Published: (1983)

An experimental and numerical study of plug formation in vertical pipes during cryogenic pipe freezing
by: Burton, M. J.
Published: (1986)

The design and analysis of pipe diffusers for centrifugal compressors
by: Bennett, Ian
Published: (1997)

The transient analysis of pipe networks transporting highly volatile liquids
by: McGarry, M. P.
Published: (1983)

An experimental study of ice formation in pipes
by: Bowen, Richard James
Published: (2000)

Simulation and measurement of transients in pipes and compressors
by: Boroomand, Masoud
Published: (1992)

The asset lives of plastic pipes : technical and economic factors affecting the in-service life of pressurised polymer pipes in the water industry
by: Mason, Nicholas Scott
Published: (1998)

The motion of air cavities in water filled pipes
by: Ali, Salah Taofeek
Published: (1988)

Internal linings of pipes to achieve energy conservation
by: Chu, C. Y.
Published: (1983)

Residual stresses in girth butt welded pipes
by: Scaramangas, A.
Published: (1984)

An experimental and analytical study of pipe-soil interaction
by: Sehmi, H. S.
Published: (1986)

Behaviour of pressurised pipes containing dents and gouges
by: Lancaster, Earl Royland
Published: (1994)

Liquid-liquid dispersed flows in horizontal pipes
by: Angeli, Panagiota
Published: (1996)

High density powder flow measurement in small bore pipes
by: Fedenczuk, P.
Published: (1983)

Wear of polymeric pipes and linings in hydraulic slurry transportation
by: Lowe, D.
Published: (1989)

Droplet coagulation in two-phase turbulent pipe flows
by: Williams, Jonathan James Elwess
Published: (1980)

Stabilisation of medium density polyethylene gas pipe in service applications
by: Palmer, Simon J.
Published: (1989)

Fast brittle fracture of water/air pressurised plastic pipes
by: Greenshields, Christopher John
Published: (1995)

Flow in pipe fittings at low Reynolds numbers : an experimental study at head losses for the flow of Newtonian and non-Newtonian liquids through a variety of pipe-fittings
by: Jadallah, M. S. M.
Published: (1980)

An experimental study of ice formation and convection during cryogenic pipe freezing
by: Tavner, Angus Charles Robert
Published: (1992)

A numerical study of solidification and natural convection during cryogenic pipe freezing
by: Keary, Alison Clare
Published: (1995)

Optimal eccentric annuli of atmospheric pressure air for thermally insulating horizontal cold pipes
by: Chakrabarti, S.
Published: (1982)

Effect of geometric design parameters on the flexural behaviour of glass reinforced plastic pipe intersections
by: Kirk, C. J.
Published: (1980)

Ratcheting of plain pressurized cylinders subjected to seismic bending moments
by: Zehsaz, Mohammad
Published: (1997)

Local loading and saddle supports on cylindrical vessels : some analytical and finite element studies of local load and saddle support problems with a special emphasis towards generating improved design methods
by: Nash, David Hugh
Published: (1999)

Development of an expert system application combining heterogeneous software to form an integrated and concurrent pressure vessel design system
by: Attwater, Iain James Stuart
Published: (1995)

Performance analysis and design of diode pumps
by: Thomas, M. D. H.
Published: (1984)

Tubing systems for the measurement of fluctuating pressures in wind engineering
by: Gumley, S. J.
Published: (1981)

Static and dynamic analysis of marine pipelines and risers
by: Shanks, J. M.
Published: (1985)

Performance analysis of edge welded metal bellows
by: Nicholls, Trevor Napier
Published: (1996)

The analysis of pressure vessel bandlock door closures
by: Casey, Graham
Published: (1994)

Control strategies for a subsea multiphase electric pump system
by: Mei, Tian Xiang
Published: (1994)