The effects of windbreaks on the effectiveness of sprinkler irrigation systems.

• Main Author: Kilaka, Eric Kisambuli
• Language: en
• Published: University of Canterbury. Waterways Centre for Freshwater Management 2015
• Subjects: Windbreaks; Canterbury; Evapotranspiration; Spray evaporation loss; Modelling
• Online Access: http://hdl.handle.net/10092/10420

In the Canterbury region, New Zealand, water is a contentious issue when irrigation and dairy farming are involved. The Canterbury region accounts for 70% of the total irrigated land area in New Zealand and is one of the most productive agricultural regions. Traditionally, water has been seen as an abundant resource, but growing water demands are now outstripping the supply of water, hence threatening the sustainability of agricultural productivity. In the long term, this problem may worsen as a result of climate change, which is predicted to increase water demands and reduce supply in many parts of Canterbury. In the recent and on-going expansion of irrigation systems, modern sprinkler irrigation methods, namely centre pivot and lateral spray irrigation technology, have replaced the old border-dyke systems. This has been due to the need to increase irrigation flexibility and efficiency to guarantee pasture growth for dairy production in dry periods. This conversion has resulted in a reduction of windbreaks to 2 m heights or sometimes led to 100% removal of windbreaks so as to accommodate centre pivot or linear move irrigation systems. Removal of windbreaks or reduction of windbreak height may increase wind speed across a field. Both spray evaporation loss and evapotranspiration are a function of wind speed. Hence, any increase in wind speed may lead to an increase in irrigation requirements. There is little information currently available on outlining how reduction of windbreak height or the complete removal of windbreaks affects efficiency in water application. Thus, this research was done to quantify the effects of windbreaks on water savings under sprinkler irrigation systems in the Canterbury region under various climatic conditions. The research was done in three major steps: (1) spray evaporation loss (SEL)was measured under various climatic conditions for two typical spray nozzles(Nelson Irrigation Corporation Rotator R3000 and Spinner S3000 nozzles) to develop SEL prediction models; (2) wind speed reduction behind windbreaks was quantified for fields under various wind conditions; and (3) the effects of wind speed reduction by windbreaks was modelled for evapotranspiration, spray evaporation loss and irrigation. The results showed that an increase of wind speed, due to the removal of windbreaks or a reduction of height of windbreaks, leads to an increase in evapotranspiration and spray evaporation losses in irrigated agriculture. For the size of the fields considered in this study which are 80 m by 80 m (Site 1 with medium porosity windbreaks) and 120 m by 120 m (Site 2 with low porosity windbreaks), extra irrigation water of up to 14% is needed in one growing season when windbreaks are reduced to 2 m in height. When windbreaks are completely removed from the field, extra irrigation water of up to 38% and 64% is needed when irrigating using the Rotator R3000 nozzle and the Spinner S3000 nozzle, respectively. Thus, reduction of water resource use can be achieved in irrigated agriculture if irrigation systems can be designed to operate under existing windbreaks. Other savings can follow, from reduced requirements for pumping, fuel and labour costs. Lastly, with future climate change projections showing that the Canterbury region will get windier and hotter, windbreaks can help mitigate water losses associated with sprinkler irrigation