Daylighting techniques used in indigenous buildings in the United Arab Emirates (UAE), an investigative approach

• Main Author: Alnuaimi, Maitha Mohammed
• Other Authors: Beltran, Liliana O.
• Format: Others
• Language: en_US
• Published: 2010
• Subjects: Daylight; UAE; Openings
• Online Access: http://hdl.handle.net/1969.1/ETD-TAMU-1891; http://hdl.handle.net/1969.1/ETD-TAMU-1891

This study investigated the potential of the daylighting systems used in the indigenous architecture of the United Arab Emirates (UAE), located in Dubai (latitude 25° N longitude 55° E). The analysis tested the lighting performance of three daylighting systems under UAE climatic conditions. The purpose of this research was to investigate the daylighting performance of three of the most common daylighting systems found in the indigenous buildings of the UAE, traditional windows (Dreeshah), gypsum decorative panels and wind tower (Barjeel). The lighting performance of each of the three lighting systems was examined. The lighting performance parameters examined were illuminance level, light distribution, uniformity, and glare. IESNA standards, CIBSE guidelines and LEED 2.2 daylighting credit and recommendations were used as the minimum recommended level for all analyzed variables. On-site measurements (illuminance and luminance) were conducted to compare measured versus simulated measurements inside the space. Desktop Radiance 2.0 Beta was used as the lighting performance analysis tool under clear sky conditions. Results have shown that the gypsum decorative panel performs better than the other two systems in terms of light uniformity and distribution, regardless of a lower illuminance level. The double panel window prototype has poor lighting performance in terms of glare, light distribution and uniformity. Wind tower performed well under the area of the wind tower itself. Apart from that it also had a poor lighting performance in terms of glare, light distribution, and uniformity.