Aspectos básicos de la fabricación de materiales compuestos Al/SiCp y Al-Si/SiCp para electrónica y automoción

Aspectos básicos de la fabricación de materiales compuestos Al/SiCp y Al-Si/SiCp para electrónica y automoción

Bibliographic Details
Main Author:	Molina Jordá, José Miguel
Other Authors:	Louis Cereceda, Enrique
Format:	Doctoral Thesis
Language:	Spanish
Published:	2009
Subjects:	Materiales compuestos Fabricación Electrónica Automoción Física Aplicada
Online Access:	http://hdl.handle.net/10045/11476

Similar Items

Preparation and Anodizing of SiCp/Al Composites with Relatively High Fraction of SiCp
by: Bin Wang, et al.
Published: (2018-01-01)

Effects of Ti-coating layer on the distribution of SiCP in the SiCP/2014Al composites
by: Delong Yang, et al.
Published: (2015-12-01)

Comportamiento a la corrosión electroquímica de aleaciones MgAl con recubrimientos de materiales compuestos Al/SiCp mediante proyección térmica
by: A. Pardo, et al.
Published: (2010-04-01)

Estudio del comportamiento a la corrosión por picadura de materiales compuestos de matriz de aluminio (A3xx.x/SiCp)
by: A. Pardo, et al.
Published: (2004-10-01)

Processing and properties of Al–Li–SiCp composites
by: Ranjit Bauri et al
Published: (2007-01-01)

The Abrasive Wear of SiCp/6061Al Composite
by: Tsai,Chao Chia, et al.
Published: (1993)

Preparation technique of SiCp reinforced Al matrix composite
by: HAO Bin, et al.
Published: (2006-05-01)

Al/SiCp Composites Behavior During Thermomechanical Processing
by: Severin, Irina, et al.
Published: (1997-06-01)

The Fabrication of SiCp/Al Composites by Squeeze Infiltration Casting
by: Hwu, Boq Kang, et al.
Published: (1994)

Effects of Processing Parameters on Properties of SiCp/Al Composites
by: Hui Qun, et al.
Published: (2016-01-01)

Microstructure Evolution in 6063 / SiCp Composites
by: Severin, Irina, et al.
Published: (1998-12-01)

Fabricación y caracterización de materiales compuestos de polimetil metacrilato con cargas de trihidóxido de aluminio y minerales no metálicos de origen nacional
by: Palomino Reyna, Luis Enrique
Published: (2018)

Fabricación y caracterización de materiales compuestos de polimetil metacrilato con cargas de trihidóxido de aluminio y minerales no metálicos de origen nacional
by: Palomino Reyna, Luis Enrique
Published: (2018)

Hot deformation behaviour of SiCp/Al composites and their matrices and an Al-Mg-Si alloy
by: Sakaris, Peter
Published: (1993)

Modeling and optimization of cutting forces and effect of turning parameters on SiCp/Al 45% vs SiCp/Al 50% metal matrix composites: a comparative study
by: Rashid Ali Laghari, et al.
Published: (2021-06-01)

Development of High-Performance SiCp/Al-Si Composites by Equal Channel Angular Pressing
by: Qiong Xu, et al.
Published: (2018-09-01)

Study Of The Properties And Particle/Matrix Interface In Al-12 Si-10% SiCp Composite
by: Sundararajan, S
Published: (2011)

The study on surface integrity on laser-assisted turning of SiCp/2024Al
by: Changtai Zhai, et al.
Published: (2020-01-01)

Microstructure-based modeling of the dynamic mechanical properties of SiCp/Al composites
by: Yuan Mei Ni, et al.
Published: (2016-07-01)

Nano-SiCp/Al2014 composites with high strength and good ductility
by: Zhang Long-Jiang, et al.
Published: (2017-05-01)

The superior ductility of fine SiCp/Al2014 composites after extrusion
by: Zhang Long-Jiang, et al.
Published: (2017-03-01)

Characterization Of Indigenous Al-Zn-Mg/SiCp Metal Matrix Composites
by: Ravi Kumar, N V
Published: (2013)

Bonding SiCp/Al Composites via Laser-Induced Exothermic Reactions
by: Yifeng Wang, et al.
Published: (2021-05-01)

Experimental investigation on bi-axial superplastic forming characteristics of AA6063/SiCp with various percentages of SiCp under various temperatures and pressures
by: V. Jayaseelan, et al.
Published: (2019-12-01)

The effect of Sol-Gel technique on the aluminium-SiCp composite
by: Idris, Jamaliah, et al.
Published: (2005)

A Study on the Machinability of A356/SiCp Composites
by: ping-chien tsai, et al.
Published: (2004)

Study on Vibration Tapping for SiCp/Al Particle-reinforced Metal Matrix Composite
by: Liu Yang, et al.
Published: (2018-01-01)

INVESTIGATION OF REINFORCEMENT RATE AFFECTING MECHANICAL PROPERTIES AND MACHINABILITY IN Al-SiCp MMCs
by: Erol KILIÇKAP, et al.
Published: (2006-03-01)

Influence of Stirring Speed on Microstructure and Wear Morphology of SiCp-6061Al Composite
by: Adetayo Abdulmumin Adebisi, et al.
Published: (2016-09-01)

SiCp/Al Composites Fabricated by Electroless Plating and Vacuum Suctiion Infiltration Processes
by: Chung, Wen-Sheng, et al.
Published: (1997)

A Study on the Powder Metallurgy Processing and Properties of SiCp/7075 Al Composites
by: Sheu, Chai-Yuuan, et al.
Published: (1996)

The effect of thermal cycling on the mechanical properties of SiCp/6061 Al aloy matrix
by: Su, Yu-Hsiang, et al.
Published: (1997)

The effect of thermal cycling on the mechanical properties of SiCp/6061 Al aloy matrix
by: Su, Yu-Xiang, et al.
Published: (1997)

A Research on the Fluidity of Al/SiCp Composite by CO2 Sand Casting
by: J. Y. Chai, et al.
Published: (2001)

Application of Modern and Classical Optimization Techniques in Abrasion of Al-Cu-SiCp and Al-Cu-B4Cp Composites
by: Ahmet SAHİNER, et al.
Published: (2018-08-01)

Application of Modern and Classical Optimization Techniques in Abrasion of Al-Cu-SiCp and Al-Cu-B4Cp Composites
by: Ahmet Sahiner, et al.
Published: (2018-08-01)

Influencia del tamaño de partícula de polvo sobre las propiedades mecánicas de la aleación PM Al7075 reforzada con SiCp
by: M. Torralba, et al.
Published: (1998-05-01)

Creep performance of SiCp reinforced aluminium alloy 2618A
by: O'Dwyer, John Gerard
Published: (1999)

Processing of AZ91D/SiCp magnesium matrix composite
by: CHIH-YI CHEN, et al.
Published: (2005)

The Fabrication of Cu/SiCp Composite by Method of Powder Sintering and Extrusion
by: TSAY, YI-SHIUN, et al.
Published: (1997)

Cannot write session to /tmp/vufind_sessions/sess_n2cherlukgndgdl8uj8oc18blb