Summary: | As the development of hydrodynamic torque converters (HTCs) points toward increasing the pump input power and pump rotation speed, the negative effects of cavitation are worsening. Most studies focus on suppressing fluid machinery cavitation to attenuate the negative effects of cavitation, such as noise, vibration, and blade damage. Therefore, we proposed two stator cavitation suppression slotting methods to suppress stator cavitation in HTCs: (1) slotting both sides of the pressure and suction sides and (2) slotting one side of the suction side. The key design parameters are analyzed, including the slot width and slot position of the stator blade. Findings show that a wider slot enlarges the mass flow rate ventilation through the slot, thus reducing the cavitation risk but decreasing the hydrodynamic performance. The most effective slot position for the second proposed method (slotting one side of the suction side) is between S0.15 (stator suction side dimensionless distance 0.15 location) and S0.6 (stator blade suction side); here, the stator cavitation can be suppressed completely. The capacity factor (Tbg) and torque ratio (K) are decreased by 6.81% and 3.23%, respectively, under the stalling speed ratio, whereas the stator cavitation almost completely disappears. Therefore, the new method of slotting one side of the stator suction side completely suppresses the stator cavitation and significantly shortens the cavitation duration. The new method of slotting one side of the blade suction side can serve as a reference for turbomachinery design. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
|