Green waste cooking oil-based rigid polyurethane foam

• Main Authors: Enderus, N.F (Author), Tahir, S.M (Author)
• Format: Article
• Language: English
• Published: Institute of Physics Publishing 2017
• Subjects: Activated carbon; Alcohols; Carbon; Coconut husk activated carbon; Compressive strength; Environmentally friendly alternatives; Maximum compressive strengths; Oils and fats; Optimum formulation; Physical and chemical properties; Polyurethane foams; Polyurethanes; Rigid polyurethane foams; Structural design; Transesterification reaction
• Online Access: View Fulltext in Publisher; View in Scopus

 Polyurethane is a versatile polymer traditionally prepared using petroleum-based raw material. Petroleum, however, is a non-renewable material and polyurethane produced was found to be non-biodegradable. In quest for a more environmentally friendly alternative, wastecooking oil, a highly abundant domestic waste with easily derivatized structure, is a viable candidate to replace petroleum. In this study,an investigation to determine physical and chemical properties of rigid polyurethane (PU) foam from waste cooking oil (WCO) was carried out. WCO was first adsorbed by using coconut husk activated carbon adsorbent prior to be used for polyol synthesis. The purified WCO was then used to synthesize polyol via transesterification reaction to yield alcohol groups in the WCO chains structure. Finally, the WCO-based polyol was used to prepare rigid PU foam. The optimum formulation for PU formation was found to be 90 polyol: 60 glycerol: 54 water: 40 diethanolamine: 23 diisocyanate. The rigid PU foam has density of 208.4 kg/m3 with maximum compressive strength and capability to receive load at 0.03 MPa and 0.09 kN, respectively. WCO-based PU can potentially be used to replace petroleum-based PU as house construction materials such as insulation panels. © Published under licence by IOP Publishing Ltd.