| Summary: | In this paper, a 2D distinct element method (DEM) model of a deep tunnel in an underground coal mine is built to thoroughly evaluate the effects of yielding (D-bolt and Roofex) and the traditional rockbolt (fully resin-grouted rebar) on controlling self-initiated strainbursts. The occurrence of self-initiated strainbursts is judged based on the stiffness difference between the loading system and rock masses for the first time. The results suggest that the total deformations of the tunnel supported with Roofex and resin-grouted rebar are 1.53 and 2.09 times that of D-bolts (1411 mm). The average velocities of detached rock blocks in the tunnel supported with Roofex and resin-grouted rebar are 3.22 and 3.97 m/s, respectively, which are much higher than that of D-bolts (0.34 m/s). 13 resin-grouted rebar bolts are broken during the strainburst, while D-bolts and Roofex survive. Compared with Roofex (295.16 kJ) and resin-grouted rebar (125.19 kJ), the D-bolt can reduce the most kinetic energy (469.30 kJ). D-bolt and resin-grouted rebar can maintain high axial force levels (214.87 and 151.05 kN) during strainbursts. Both Roofex and resin-grouted rebar fail to control strainbursts. The bolt number significantly influences the control effects of yielding rockbolts on strainbursts. 9 and 12 D-bolts cannot control the strainburst, while 15 and 18 D-bolts can make the tunnel stable. In addition, the detachment and ejection of rocks between rockbolts can be well restrained using surface retain elements, e.g., steel arch. This study highlights the usage of numerical modeling methods in assessing the performance of yielding rockbolts, which can be served as a promising tool to improve and optimize the design of rock supporting in burst-prone grounds. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
|
|---|
