Enhancement of electrical properties of NASICON-type solid electrolytes (LiSn2P3O12) via aluminium substitution

NASICON-type electrolyte is one of the possible solid-state electrolytes to be employed in solid-state energy devices. The Li1+xAlxSn2-xP3O12 NASICON-based solid electrolyte materials were fabricated using a mechanochemical milling method at 650 degrees C for 8 h, where x is from 0 to 0.8. From the...

Full description

Bibliographic Details
Main Authors: Mohamed, NS (Author), Rusdi, H (Author), Rusdi, R (Author), Subban, RHY (Author)
Format: Article
Language:English
Published: 2020
Subjects:
Online Access:View Fulltext in Publisher
LEADER 02654nam a2200289Ia 4500
001 10.1016-j.jsamd.2020.06.003
008 220223s2020 CNT 000 0 und d
245 1 0 |a Enhancement of electrical properties of NASICON-type solid electrolytes (LiSn2P3O12) via aluminium substitution 
260 0 |c 2020 
856 |z View Fulltext in Publisher  |u https://doi.org/10.1016/j.jsamd.2020.06.003 
520 3 |a NASICON-type electrolyte is one of the possible solid-state electrolytes to be employed in solid-state energy devices. The Li1+xAlxSn2-xP3O12 NASICON-based solid electrolyte materials were fabricated using a mechanochemical milling method at 650 degrees C for 8 h, where x is from 0 to 0.8. From the X-ray diffraction (XRD) analysis, the crystallographic phases of the parent material and the partial aluminium (Al) substituted one have been verified. Site occupancy factor (s.o.f) studies from the XRD data refinement illustrate that the material with x = 0.4 has a stoichiometry in good agreement with the nominal tin (Sn):aluminium (Al) ratio which is 8:2. Field emission scanning electron microscopy (FESEM) was conducted to study the surface morphological properties, revealing the homogenous single-crystalline structure in the sample with x = 0.4, which consists of particles of the smallest crystallite size of 3.77 nm among the samples investigated. The process of partial Al-substitution was further confirmed by the energy dispersive X-ray (EDX). The material with x = 0.4 possesses the maximum conductivity value of 7.57 x 10(-6) S.cm(-1), which was improved up to 3.79 x 10(-5) S.cm(-1) by a silver paint treatment. The correlation between the microstructure and the ionic conductivity has been explained via the EDX and impedance analysis results. Ions were found to be the main charge carriers from the transference number analysis (TNM). Variation of relaxation in the dielectric study verifies that Li1+xAlxSn2-xP3O12 obeys a non-Debye characteristic. Patterns of the dielectric results strengthened the trend of ionic conductivity. (C) 2020 Publishing services by Elsevier B.V. on behalf of Vietnam National University, Hanoi. 
650 0 4 |a BATTERIES 
650 0 4 |a Dielectric 
650 0 4 |a DYNAMICS 
650 0 4 |a IONIC-CONDUCTIVITY 
650 0 4 |a Li1+xAlxSn2-xP3O12 
650 0 4 |a Mechanochemical milling 
650 0 4 |a MICROSTRUCTURE 
650 0 4 |a NASICON 
650 0 4 |a PERFORMANCE 
650 0 4 |a Solid electrolyte 
650 0 4 |a TEMPERATURE 
700 1 0 |a Mohamed, NS  |e author 
700 1 0 |a Rusdi, H  |e author 
700 1 0 |a Rusdi, R  |e author 
700 1 0 |a Subban, RHY  |e author 
773 |t JOURNAL OF SCIENCE-ADVANCED MATERIALS AND DEVICES