Establishment of Heat Treatment Process for Modified 440A Martensitic Stainless Steel Using Differential Scanning Calorimetry and Thermo-Calc Calculation

by Huei-Sen Wang, Pei-Ju Hsieh
Published 2015-12-01

Effects of the Hot Isostatic Pressing Process on Crack Healing of the Laser Repair-Welded CM247LC Superalloy

by Keng-Tu Hsu, Huei-Sen Wang, Hou-Guang Chen, Po-Chun Chen
Published 2016-10-01

Welding properties of casted Cu-Ni-Si-Cr alloy

by Hung-Sheng Yeh, 葉泓陞
Published 2018

Investigation into the effects of Mg addition in the 55.0wt.% Al-Zn alloy on the microstructure, thermal properties and corrosion resistance

by Yi-Jun Shen, 沈怡均
Published 2019

The effect of silicon addition on properties of laser welded Zr-base bulk metallic glasses

by Jia-Hong Pan, 潘家弘
Published 2019

Laser amorphous fabrication of a matrix-crystallized Zr-Cu based bulk metallic glass composite

by Yi-Ting Liu, 劉奕廷
Published 2017

Investigation into the effects of low Al and various Mg additions on the microstructure, thermal properties and corrosion resistance

by Po-Chun Chen, 陳柏竣
Published 2017

Effects of the heat treatment and the hot isostatic pressing process on crack healing of the laser repair-welded CM247LC superalloy

by Keng-Tu Hsu, 許耿圖
Published 2017

Investigation into the effects of Mg addition in the Al-Zn alloy on the microstructure, thermal properties and corrosion resistance

by Jiun-Yi Wu, 吳俊毅
Published 2016

Investigation into the Pulsed Nd:YAG Laser Repair Welding for Cast Nickel-base IN738LC Superalloy

by Yung-Guei Luo, 羅永桂
Published 2007

Investigation into the High Temperature Wear Resistance and Oxdiation of Wear Resistant Surface Coatings to Titanium Alloy

by Wei-Hong Liao, 廖偉宏
Published 2008

Effect of Mn and Al-elements on the properties of TWIP steels after hot rolling

by Kai-Bin Jhang, 章凱斌
Published 2010

Study on solidification behavior of TWIP steel ingots

by Sheng-Yao Huang, 黃聖堯
Published 2010

On the Spheroidization of Commercial Steel Wires for Fastener Manufacturing

by Po-Hsiang Wang, 王勃翔
Published 2010

Effects of Initial Welding Temperatures on the Microstructure Evolution and Mechanical Properties of Nd:YAG Laser Welded (Zr53Cu30Ni9Al8)99.5Si0.5 Bulk Metallic Glass

by Mau-Sheng Chiou, 邱茂盛
Published 2010

Effect of Interstitial Elements on the Microstructure, Mechanical Properties and Corrosion Resistance of the Heat Affected Zone in a 16％Cr Ferritic Stainless Steel Weld

by Ruei-Hung Wu, 吳睿紘
Published 2011

Microstructure Development and Crack Behaviors of the Pulsed Nd:YAG Laser Repair Welded RENE 77 Nickel-base Superalloy

by Jhih-ying Huang, 黃致穎
Published 2009

A Study on Super Duplex Stainless Steel Application of Lead-Free Wave Soldering Equipment

by Ken-tu Hsu, 許耿圖
Published 2009

Joining of (Zr53Cu30Ni9Al8)Si0.5 Bulk Metallic Glass Using Pulsed Nd:YAG Laser Welding

by Chung-chun Hsueh, 薛仲俊
Published 2009

The oxidation behavior of a novel Ni-free Zr-Cu-based bulk metallic glass composite

by Wei-Hau Li, 李偉豪
Published 2014