| Summary: | Aims: The aim of this study was to compare color stability and surface topography of two different feldspathic porcelains, both qualitatively and quantitatively, after exposure to routinely consumed beverages over different time periods using a spectrophotometer and surface noncontact profilometer, respectively.
Materials and Methods: In this in-vitro study, a total of 120 base metal alloy discs with a thickness of 0.5 mm were made following the conventional casting technique. They were randomly divided into two categories. Category-I was built with IPS.d.Sign (Ivoclar), Category-II was built with Ceramco 3 (Dentsply) each containing 60 samples. The samples were immersed into different beverages. Color stability and surface roughness were measured by a spectrophotometer and profilometer, respectively.
Statistical Analysis: t-test between two categories and ANOVA within the same group.
Results and Conclusion: Color difference (ΔE) between different test solutions at different intervals showed clinically acceptable range (below 3.3 units). Thus, ceramics were considered color stable and resistant to external staining. Scanning electron microscope and profilometer study revealed that there were significant surface roughness changes in both IPS.d.Sign and Dentsply metal ceramic materials when immersed in soft cola drink and coffee solutions for 90 days and compared to the control group which was immersed in distilled water.
|
|---|
